Print to Another Station

Created on:
Updated on:

If you have limited printers or are using devices that don't print directly to your printer, you can print to another station.

Check out this clip from Planning Center University.

Select the gear on the station to choose a station to print to.


You'll need to have Station Keys set up in order to access the Station Settings from the gear.

Choose where you want your station to print from the Print to dropdown.


Once you choose the station to print to, select Save, and the station will print to its new selected station!

The Station that the printer is connected to must be in Station mode in order for it to print. If it's not, you'll receive an error message like this:


If you receive this error, launch the other station, and you'll be able to print to that station.

Edit Settings from the Stations Page

You can also go to the Stations Settings by selecting the station from the Stations tab.


Choose where you want your station to print from the Print Station dropdown.

Was this article helpful?
13 out of 25 found this helpful