When using a self station with touchscreen device, you can show the keypad, scanner, or both. Choose what you'd like to show when setting up your station, then change it from the station settings or on the self station itself, as needed.
Change on Station Settings
From the Stations tab, select the station to change the input method.
Choose what you'd like to show on the screen, depending on if you have a way to scan a barcode or mobile pass, or if you just want people to check in with their phone number.
What you choose to show will determine the way people can input that information. You can allow the keypad only or allow a keyboard to show on screen.
Each option has a different view. Choose your option based on one of these previews.
Keypad and Scanner: Onscreen Keypad
This option allows the person to enter their phone number on the keypad or tap the camera to scan their barcode or mobile pass.
Keypad and Scanner: Keyboard/Scanner
This option allows the person to enter their phone number on the keyboard.
Only Keyboard: Onscreen Keypad
This option allows the person to enter their phone number using the keypad.
Only Keyboard: Keyboard/Scanner
This option allows the person to enter their phone number using the keyboard.
If you only use barcodes or mobile passes for checking in at this station, set it as scanner, which only allows the device to scan barcodes or mobile passes.
Change on Station
Change the input method from the self station by selecting the button shown at the bottom of the station; it will be the opposite input as what is currently shown.